§ 6. Final plat details

The final plat shall show the following:

(a) All streets and alleys which shall be cross-hatched on the plat.

(1) Names of streets within proposed subdivision.

(2) The location of survey monuments.

(3) Data sufficient to readily determine the location, bearing, length and width of every street, lot, boundary line and easement, and sufficient to locate such lines on the ground.

(4) Deed restrictions, if any.

(5) Location by section, township, range, county and state, and including descriptive boundaries of the subdivision.

(6) Statement dedicating all easements.

(7) Statement dedicating all streets, alleys and other public areas not previously dedicated.

(8) A notarized affidavit that the applicant is the recorded owner of the land and that he approved of the plat.

(9) Place for the signature of the zoning officer and the date of approval.

(10) Certification by a registered engineer or surveyor that details of the plat are correct.

(11) Certificate of approval with place for endorsement by the city clerk and showing the ordinance number and date of approval of the council.

(b) The commission may require supplementary information on [a] separate sheet or sheets including, but not limited to, the following information:

(1) Information covering existing and proposed streets and utilities in or adjacent to the proposed subdivision.

(2) Sites for multiple-family dwellings, shopping centers, churches, industry or other nonpublic uses, exclusive of one-family detached dwellings.

(3) Topographic contours at such intervals as determined to be necessary by the commission.

(4) Significant features including watercourses, marshes, rock outcrops and houses or barns.

(5) The location of all water mains and fire hydrants or the location of all sewer mains and manholes, or the location of all gas mains and manholes or the location of all electric power lines and poles.

(Ord. No. 85-12, § 1(A, B), 10-15-85)